ACAppliance CodesFind code
Safe checks first

Washer not draining error codes

Use this cluster when a washer stops with standing water, a long-drain warning, or a drain-pump related code. Start with visible drain path checks before opening service covers.

12Matching codes
9Brands
1Appliances
2026-07-08Updated

Fast path

Match the exact display text first. Common matches in this cluster include LG Washer OE, Whirlpool Washer F21, Whirlpool Washer F8 E2, Whirlpool Washer F9 E1, Samsung Washer 5C.

Searches covered

  • washer not draining error code
  • washing machine drain code
  • washer long drain error
  • washer still full of water code

How to narrow it down

Use the brand, appliance type, and exact code together. A symptom search can point to the right category, but the model number controls the exact manual steps and access points.

Open the matching code page below for aliases, model-family notes, source links, and the safest check order.

Safe first checks

  1. Record the exact display text before canceling the cycle.
  2. Check the drain hose for kinks, crushing, or a frozen section.
  3. Confirm the standpipe or household drain is not backing up.
  4. Clean an accessible pump filter only if the model manual shows one.
  5. Retry once after the visible restriction is corrected.

Stop troubleshooting when

  • Water leaks from the base or service panel.
  • The pump hums, grinds, or will not move water after visible checks.
  • The same drain code returns on an empty rinse or drain test.

Related problem hubs

Drain problem error codesFilter or screen condition error codes

Related troubleshooting guides

Washer Drain Error Code Checklist Before You Call ServiceLG Washer OE Code: Not Draining ChecklistSamsung Washer 5C Code: Drain Problem Before ServiceWhirlpool Washer F9 E1 Code: Long Drain GuideHow to Read Appliance Error Codes Without GuessingWasher Error Code Basics: Fill, Drain, Door, Balance, and Suds

FAQ

Which code page should I open first?

Open the page that matches the exact brand, appliance type, and display text. In this cluster, LG washer OE is one common starting point.

Can I reset the appliance first?

Use one reset only after visible safety checks are complete. If the same code returns, treat it as an active condition instead of repeating resets.

When should I stop and call service?

Water leaks from the base or service panel.

Matching code guides

12 pages match this search cluster.

All search guides

LG Washer

OE

Check the drain hose and clean the accessible pump filter before repeating the cycle.

Drain problem

Whirlpool Washer

F21

Check for a clogged drain hose, pump filter, or slow household drain.

Drain problem

Whirlpool Washer

F8 E2

Check whether the detergent drawer or cartridge is clogged before retrying.

Filter or screen condition

Whirlpool Washer

F9 E1

Check the drain hose height, kinks, and accessible pump filter before retrying.

Drain problem

Samsung Washer

5C

Inspect the drain hose and clean the pump filter if your model has one.

Drain problem

Frigidaire Washer

F2

Check the drain hose and any accessible drain restriction before retrying spin.

Drain problem

Maytag Washer

F9 E1

Inspect the drain hose and accessible pump filter, then retry a short drain/spin.

Drain problem

Amana Washer

drn

Check the drain hose height, kinks, and household drain before retrying.

Drain problem

Kenmore Washer

F9 E1

Check the drain hose, standpipe, and visible water level before opening any model-approved cleanout.

Drain problem

Speed Queen Washer

Er dr

Check for standing water, drain hose restrictions, and a backed-up standpipe before retrying.

Drain problem

Haier Washer

E1

Clear the pump or drain path only by the model-approved method and stop if water remains.

Drain problem

Haier Washer

E13

Follow the model-approved lint-clearing routine and avoid repeated dry cycles until cleared.

Filter or screen condition