Refrigerator error codes

Check that doors close, vents are clear, and cabinet temperature is safe before resetting.

Check the ice bucket, water supply, and visible ice blockage before using model-specific reset steps.

Look for heavy frost at visible vents and use service if the defrost warning returns after one reset.

Keep the door closed, check for blocked vents or a door left open, and protect frozen food if temperature rises.

Confirm power is stable, acknowledge the display if needed, and avoid repeated breaker resets.

Let TurboCool finish or turn it off from the control panel if cooling behavior is otherwise normal.

Let TurboFreeze finish or turn it off from the control panel if freezer temperature is otherwise safe.

Protect food and avoid repeated resets; compressor-start diagnosis should be handled by service.

Check door closure, gasket contact, and items blocking drawers before resetting the display.

Do not attempt refrigerant work. Protect food and arrange qualified sealed-system service.

Do not keep resetting or attempt sealed-system work; use qualified service and protect perishable food.

Check only visible bucket and ice-path issues; service is needed if EID remains.

Avoid forcing the ice maker mechanism and use service if the assembly warning stays active.

Keep food safe and use service if the condenser fan warning returns; do not open powered rear covers.

Reset power once only if the unit is dry and stable; service is likely if communication fails again.

Look for heavy frost around visible vents and avoid chipping ice or opening powered evaporator covers.

Record whether the display says freezer or refrigerator defrost sensor and use service if it returns.

Confirm freezer vents are not blocked and avoid removing covers; service is likely if the fan code returns.

Record the code, keep food safe, and use service if the sensor code returns after one reset.

Confirm the water supply is open and stop if water leaks or the flow warning returns.

Check that the ice bucket and freezer air path are clear, then stop if the code returns after one reset.

Move food away from air vents and keep the doors closed while checking whether cooling recovers.

Keep doors closed, monitor cabinet temperature, and use service if the sensor warning returns.

Exit demo mode using the model's documented button sequence and verify the cabinet starts cooling.

Exit Cooling Off with the model-specific button sequence and verify the refrigerator begins cooling.

Check the water filter status, confirm water flow, and reset the reminder only after the filter step is handled.

Confirm food temperature is safe, press the model's confirm or measured-fill key if required, and avoid repeated breaker resets.

Reseat the ice bucket if accessible and avoid forcing the ice maker or opening powered panels.

Check for visible ice blockage without sharp tools and use service if the warning returns.

Confirm the ice maker is not blocked and run only the model-approved ice maker reset.

Check for blocked ice-room airflow and stop if the fan is noisy or the code returns.

Keep the doors closed, look for heavy frost at visible vents, and stop if the code returns after one reset.

Protect perishable food and avoid repeated resets; compressor or sealed-system diagnosis needs service.

Check the ice bucket and visible ice path first; service is likely if the sensor code returns.

Exit Cooling Off with the model's documented button sequence and verify the cabinet begins cooling.

Remove anything blocking the door, check the gasket contact, and let the alarm clear after closure.

Keep doors closed, check for blocked vents or a door left open, and protect food if temperature keeps rising.

Confirm power is stable, check food temperature, and clear the message only after the outage is understood.

Keep food safe and use service if the fan warning returns; do not open powered fan covers.