ACAppliance CodesFind code
Safe checks first

Samsung Washer 4C Code: No Water or Slow Fill Checks

Samsung washer 4C usually matters before the wash can begin. It is a water intake warning, so the best first checks stay at the supply side.

Water path

Check the water path first

Follow the water path from the home supply to the appliance before assuming a valve, sensor, or control failure.

At-a-glance diagnosis

Likely meaning

4C usually means the washer did not detect enough incoming water in the expected time.

First safe check

Open both supply valves fully, inspect visible hose kinks, and confirm the home has normal water pressure.

Stop point

Stop if water keeps entering after cancellation, if hoses leak, or if the code returns after normal supply is confirmed.

Visual check order

  1. 1

    Open hot and cold supply valves fully.

  2. 2

    Straighten visible hose bends behind the washer.

  3. 3

    Check whether other faucets have normal pressure.

  4. 4

    Use only model-approved inlet screen cleaning steps.

Code appearsCheck visible causeRetry onceStop if repeated

What 4C usually means

4C usually means the washer did not detect enough incoming water in the expected time.

Codes can vary by exact Samsung washer model number, production year, and regional design. Use this as first-pass guidance, then confirm the model-specific manual or manufacturer support page before opening panels or replacing parts.

First checks

Open both supply valves fully, inspect visible hose kinks, and confirm the home has normal water pressure.

A washer can show a fill code when a hose is kinked, a supply valve is partly closed, or inlet screens need model-approved cleaning.

  • Open hot and cold supply valves fully.
  • Straighten visible hose bends behind the washer.
  • Check whether other faucets have normal pressure.
  • Use only model-approved inlet screen cleaning steps.

When to stop

Stop if water keeps entering after cancellation, if hoses leak, or if the code returns after normal supply is confirmed.

Keep the full model number, exact 4C display text, cycle name, and timing ready before contacting Samsung support or a qualified technician.

Model numbers affected

Commonly searched model families include front-load washers, top-load washers, high-efficiency washers, laundry centers, and compact models.

This is not a confirmed model-number list. Match the exact code to the full model number on the appliance tag before ordering parts, opening panels, or booking service.

Related code pages

Related problem topics

Related troubleshooting guides

FAQ

What is the main point of Samsung Washer 4C Code: No Water or Slow Fill Checks?

4C usually means the washer did not detect enough incoming water in the expected time.

What should I check first?

Open both supply valves fully, inspect visible hose kinks, and confirm the home has normal water pressure.

When should I stop troubleshooting?

Stop if water keeps entering after cancellation, if hoses leak, or if the code returns after normal supply is confirmed.

Editorial note

This guide is independent educational content. It does not replace the model-specific manual, official manufacturer support, or qualified repair service.