Quick answer
Cancel the cycle and turn off water supply if filling continues.
Safety note
Disconnect power before opening panels or touching wiring. If water is leaking near electricity, stop and call a qualified technician.
Related problem hub
See more overfill or water level fault appliance codes across other brands and appliance types.
What FE means
On many LG washer models, FE belongs to the overfill or water level fault category. The appliance is detecting too much water or a water-level reading that does not match the cycle.
Codes and exact steps can vary by model number, production year, and regional design. Use this guide as first-pass orientation and confirm model-specific details with the manufacturer source listed below.
Before you start
Write down the full model number and the exact display text before changing parts or clearing the control. Similar-looking codes can map to different model families, and a reset can erase useful timing clues.
If the appliance shows active leaking, a burning smell, smoke, gas odor, repeated breaker trips, or water near power, stop this checklist and use qualified service.
Model numbers affected
Commonly searched LG model families include front-load washers, top-load washers, high-efficiency washers, laundry centers, and compact models.
This is not a confirmed model-number list. Similar display codes can mean different things across model families, production years, and regional designs. Match the exact code to the full model number on the appliance tag before ordering parts or opening panels.
Common causes
- Too much detergent or wrong detergent type
- Pressure sensor or hose fault
- Inlet valve stuck open
- Drain problem causing water level to stay high
How to check and fix FE
- Confirm the model number and exact code spelling.
- Cancel the cycle and watch whether water keeps entering.
- Turn off water supply if filling continues.
- Use only the detergent type and amount recommended by the manufacturer.
- Check drain hose position and household drain flow.
- Run one controlled reset only when the appliance is dry, stable, and safe.
- Stop if FE returns immediately or appears on an empty test.
Safe checks before service
- Cancel the cycle and watch whether water keeps entering.
- Turn off water supply if filling continues.
- Use only the detergent type and amount recommended by the manufacturer.
- Check drain hose position and household drain flow.
What not to do
- Do not restart a dishwasher or washer while active water is leaking.
- Do not reach into standing water around outlets, controls, or wiring.
- Do not bypass locks, sensors, fuses, or leak protection to force a cycle.
- Do not open powered panels or touch wiring for a code check.
- Do not assume one display code proves one specific part has failed.
Stop and call a technician when
- Water keeps entering after power is off.
- The tub is overfilled.
- Overflow repeats after detergent and drain issues are corrected.
FAQ
Is FE always a broken part?
No. On a LG washer, FE usually identifies a overfill or water level fault category. A blocked hose, dirty filter, uneven load, or unsafe operating condition can trigger a code before a part failure is confirmed.
Can I reset FE?
A single power reset can be reasonable after visible checks are complete and the appliance is safe. If FE returns immediately, treat it as an active fault rather than a nuisance message.
Why does model number matter?
Brands reuse similar code text across model families. The model number controls the exact manual steps, access points, and service boundary.
Aliases and related display text
People may search for this same condition using different capitalization or alternate display forms.
- FE