Whirlpool washer error codes
Browse 7 Whirlpool washer code guides. Start with the exact display text, compare the problem category, and use official support for model-specific steps.
Hub summary
7 code guides
6 problem categories
Updated 2026-07-02
How to use this page
Match the code exactly, then open the guide for the meaning, safe checks, stop conditions, aliases, and manufacturer source links. Do not order parts from a code alone.
Common problem categories
These categories appear in Whirlpool washer guides.
Drain problem
The appliance is taking too long to remove water or cannot confirm normal draining.
2matching codes
Door or lid lock
The appliance does not detect a fully closed, latched, or locked door.
1matching codes
Water fill problem
The appliance is not filling fast enough, cannot detect water, or sees an inlet fault.
1matching codes
Motor or drive fault
The control cannot confirm normal motor movement, rotation speed, or pump operation.
1matching codes
Excess suds
The appliance is detecting too much foam, which can block normal draining or sensing.
1matching codes
Filter or screen condition
A filter, lint screen, or sump area needs attention before the appliance can run normally.
1matching codes
All Whirlpool washer guides
Open the exact code page for model-number notes and safe troubleshooting order.
Whirlpool Washer
F21
Check for a clogged drain hose, pump filter, or slow household drain.
Whirlpool Washer
F5 E2
Remove laundry from the latch area and avoid forcing the locked door.
Whirlpool Washer
F7 E1
Reduce the load and verify the basket can move freely before retrying.
Whirlpool Washer
F8 E1
Open supply valves, check fill hoses, and clean inlet screens if safe.
Whirlpool Washer
F8 E2
Check whether the detergent drawer or cartridge is clogged before retrying.
Whirlpool Washer
F9 E1
Check the drain hose height, kinks, and accessible pump filter before retrying.
Whirlpool Washer
Sud
Let suds settle and run a rinse/spin cycle without adding detergent.