KitchenAid dishwasher error codes
Browse 5 KitchenAid dishwasher code guides. Start with the exact display text, compare the problem category, and use official support for model-specific steps.
Hub summary
5 code guides
4 problem categories
Updated 2026-07-02
How to use this page
Match the code exactly, then open the guide for the meaning, safe checks, stop conditions, aliases, and manufacturer source links. Do not order parts from a code alone.
Common problem categories
These categories appear in KitchenAid dishwasher guides.
Drain problem
The appliance is taking too long to remove water or cannot confirm normal draining.
1matching codes
Water fill problem
The appliance is not filling fast enough, cannot detect water, or sees an inlet fault.
2matching codes
Motor or drive fault
The control cannot confirm normal motor movement, rotation speed, or pump operation.
1matching codes
Leak or overflow detection
The appliance has detected water where it should not be, or water level is above expected range.
1matching codes
All KitchenAid dishwasher guides
Open the exact code page for model-number notes and safe troubleshooting order.
KitchenAid Dishwasher
F6 E1
Confirm the water supply is open and the inlet hose is not kinked.
KitchenAid Dishwasher
F7 E2
Stop repeated cycles if the wash motor does not run normally or the code returns empty.
KitchenAid Dishwasher
F8 E4
Turn off water if leaking is active and inspect around the door and base before resetting.
KitchenAid Dishwasher
F9 E1
Check the drain hose, sink connection, and disposal plug before another cycle.
KitchenAid Dishwasher
H2O
Open the supply valve fully and check for a kinked inlet hose.