Kenmore washer error codes
Browse 5 Kenmore washer code guides. Start with the exact display text, compare the problem category, and use official support for model-specific steps.
Hub summary
5 code guides
5 problem categories
Updated 2026-07-04
How to use this page
Match the code exactly, then open the guide for the meaning, safe checks, stop conditions, aliases, and manufacturer source links. Do not order parts from a code alone.
Common problem categories
These categories appear in Kenmore washer guides.
Drain problem
The appliance is taking too long to remove water or cannot confirm normal draining.
1matching codes
Door or lid lock
The appliance does not detect a fully closed, latched, or locked door.
1matching codes
Water fill problem
The appliance is not filling fast enough, cannot detect water, or sees an inlet fault.
1matching codes
Excess suds
The appliance is detecting too much foam, which can block normal draining or sensing.
1matching codes
Unbalanced load
The appliance cannot spin or tumble normally because the load is uneven.
1matching codes
All Kenmore washer guides
Open the exact code page for model-number notes and safe troubleshooting order.
Kenmore Washer
F5 E2
Check for clothing or debris at the latch and do not force a locked lid or door.
Kenmore Washer
F8 E1
Open the supply valves fully, check visible hose kinks, and confirm household water pressure.
Kenmore Washer
F9 E1
Check the drain hose, standpipe, and visible water level before opening any model-approved cleanout.
Kenmore Washer
Sd
Let foam settle, avoid adding detergent, and run only a model-approved rinse or clean-water cycle.
Kenmore Washer
UE
Redistribute heavy items, confirm the washer is level, and retry one spin cycle.